Linewatch

Fiber & low voltage · by VigilantEye Monitoring

Your network is only as good as the cable behind it.

We install, splice, test, and restore the physical layer under your network — fiber backbone, copper drops, PoE switching, and wireless links. Every job leaves with a test record.

24/7 dispatch · 407‑544‑6344 Book a site survey

Emergency fiber restoration · any hour

Fiber cut. Network down. Call the line.

OTDR fault location, fusion splice or temporary bypass to get you back online first, then a re-test and a same-day report.

$395

Call-out · first hour + fault location

Services

When the network goes down, it is usually the cable.

Emergency fiber restoration 24/7

OTDR fault location, fusion splice or temporary bypass, re-test, same-day report.

Fiber backbone

Single-mode and multimode, underground, aerial, or in conduit between buildings and poles.

Splicing & termination

Fusion splices, enclosures, patch panels, and connectors, loss-tested at both ends.

Testing & certification

OTDR traces, power-meter loss, and copper certification with an as-built drawing.

Structured cabling & PoE

Cat6 and Cat6A drops, PoE switches, media converters, surge protection on every outdoor run.

Wireless links

Point-to-point bridges for lots, yards, and job sites where trenching is not an option.

Racks & closets

MDF and IDF buildout: racks, cable management, UPS, grounding, labeling.

Maintenance

Annual re-test against baseline, enclosure inspection, post-storm surge replacement.

When a line is cut

Five steps, from the first call to the test report.

Ticket

Your call, or our monitoring center sees a link drop.

Triage

Power, config, or physical break — decided remotely.

Locate

OTDR finds the break. 811 before any digging.

Restore

Fusion splice, or a bypass to get you back online first.

Prove it

Re-test, confirm every link is up, send the report.

We don't promise a restoration time in writing — where the break is and how we can reach it decide that. What we do promise: no job closes without an OTDR trace or certification report.

Rates

Published, so you know before we roll.

Emergency call-out

$395

Any hour. First hour and fault location included. $175/hr after.

Service call

$145

Scheduled, business hours, first hour.

Cable drop

from $165

Cat6 up to 60 m, terminated and certified.

Site survey

$250

Credited if we do the work.

Fusion splice, tested$32 / splice

Strand certification$28 / strand

Backbone & wireless linksQuoted per site

Monitored by VigilantEye Monitoring? Active monitoring accounts pay a $295 emergency call-out — and usually our operators have opened the ticket before you notice anything is down.

WHAT WE WORK ON

Your cable, on your property.

We work on client-owned private plant only — the fiber, copper, and wireless links that carry your network. We don't touch carrier, utility, or ISP fiber; if the break is on their side, we'll show you the trace and tell you who to call.

EVERY JOB

Spliced. Tested. Labeled.

An OTDR trace or certification report on every job
An 811 locate before any excavation — emergency or not
Labels at both ends, so the next tech isn't guessing
An as-built drawing for new backbone and cable runs

Part of VigilantEye Monitoring

If we monitor your site, we usually know when the line goes quiet.

Linewatch is the fiber and low-voltage service line of VigilantEye Monitoring, run by our Installation & Service division. When a monitored camera drops because of the cable, our monitoring center hands the ticket straight to Linewatch — no second company, no second phone tree.

Call 407-544-6344 Installation & Service Monitoring